| Name | Status | Description | Estimated Hours | Estimated Cost | Purchase Price | Edit |
|---|
|
Mailbox
|
Submitted |
Construct a mailbox that resembles this house. It'll be approximately the size of a brick mailbox but instead be wood frame and have white siding and a roof. Front side will house the mailbox itself. The back side will have an enclosure and window to view the house for a webcam and internal power outlets accessible from the outside for lights or lawn equipment. Conduit will need to be laid under the sidewalk and under the lawn up to the house. Conduit will carry a 12ga cable for power to the mailbox. A second conduit will carry the ethernet cable for data to the camera.
Comments(0)
|
22 |
$250.00 |
$470.00 |
|
|
Installing lights
|
Submitted |
Hang the lights and assemble any yard decorations. Most lights have been purchased at this point.
Comments(0)
|
17 |
$0.00 |
$170.00 |
|
|
Controller Box
|
Submitted |
This is the box that will plug into the parallel port on the controlling computer and store the state of all of the xmas lights. Cat5 cable will be used to carry 6 signals + ground to each of the outlet boxes.
Comments(0)
|
18 |
$50.00 |
$230.00 |
|
|
Outlet Box
|
Submitted |
This box will have 6 standard 110V plugs switched via an internal board with triacs. The triacs are controlled by 6 incoming signals from the controller box over a cat5 cable.
There should be enough room in a standard 3 gang outlet box for the circuitry and outlets.
Comments(0)
|
3 |
$20.00 |
$50.00 |
|
|
Lampmaster Controller Software
|
Submitted |
Lampmaster interface to the controller box. This is a slight modification to the regular parallel port switch and will require a new switch type and handling of multiple signals per action.
Comments(0)
|
5 |
$0.00 |
$50.00 |
|
|
Programmable Pattern software
|
Submitted |
Lampmaster interface for pattern submissions. Allows the end user to select not only a on/off toggle to the lamp, but also allow a pattern to play out. A pattern will be a programmable script that will allow some combination of turning on multiple lamps at the same time, turn lights on and off in a specific sequence, or other possibilities. There will be a total time duration for a pattern for regular users.
Comments(0)
|
18 |
$0.00 |
$180.00 |
|
|
Sequencer Software
|
Submitted |
This will be a lampmaster interface that allows lamps to toggle the lights in a pattern programmed in a specific sequence, designed to be played along with music. Music player and sequencer client will reside on the same machine so they can be triggered at the same time. This is only for the actual performance of the sequence itself, not the creation of it.
Comments(0)
|
35 |
$0.00 |
$350.00 |
|
| Totals | | | 118 | | $1500.00 | |
